Shenzhen Hong Ye Jie Technology Co., Ltd.
Main products:Mold silicone rubber, Manual mold silicone rubber, Pad printing silicone rubber, Addition cure liquid silicone, Injection silicone, Electronic potting silicone
Products
Contact Us
  • Contact Person : Ms. Wu Alice
  • Company Name : Shenzhen Hong Ye Jie Technology Co., Ltd.
  • Tel : 86-755-89948013
  • Fax : 86-755-89756930
  • Address : Guangdong,Shenzhen,Liulian Shibi Industrial Zone, Pingdi Town, Longgang District,Shenzhen
  • Country/Region : China
  • Zip : 518117

Encapsulant and Potting silicone

Encapsulant and Potting silicone
Product Detailed
Encapsulant and Potting silicone to sealing bonding and coating for electronic parts Filling for LED, LCD electronic display

Encapsulant and Potting silicone

Applications of Encapsulant and Potting silicone:

Encapsulant and Potting silicone is applicable to sealing, bonding and coating for electronic parts. Filling for LED, LCD electronic display, circuit board.

Description of Encapsulant and Potting silicone:

HY-215# Encapsulant and Potting silicone is two-component room temperature vulcanization silicone rubber, which has low viscosity, easy mixing and pouring, is applicable to bulk pouring with excellent electrical performance.

Standard Datasheet of Encapsulant and Potting silicone:

Model HY-215# Encapsulant and Potting silicone Type

Gel-type Components  A   B

Appearance  (liquid) black / transparent / white yellowy

Mixing ratio   100 5

Viscosity (Pa.s)     5000

Pot life(25C) (mins)  20 - 30

Curing time (mins)    2 - 4

Hardness shore A    25 ± 2

Tensile strength (Mpa)  0.5 - 1.5

Elongation at break (%)  30 - 50

Dielectric strength (kv/m-1)  20

Specific inductive capacity(1MHz)  2.8 - 3.2

Breakdown voltage (KV.mm-1)  16

Volume resistivity ()  1×1014

Dielectric loss factor (1MHz)  1×10-3

Features of Encapsulant and Potting silicone:

HY-215 Encapsulant and Potting silicone has sticky viscosity, low shrinkage and non-corrosive;

the HY-215# Encapsulant and Potting silicone can be used for a long period at the temperature of -60C-200C with the characteristics of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing.

Using Instructions of Encapsulant and Potting silicone:

1. Clean and dry the electronic element to be poured;

2. Mix the component A (silicone) and component B(hardener) evenly according to the proportion, and can be poured after deaired the bubbles. The surface will cure in about 2-4 hours after pouring.

More information need about our HY-215# Encapsulant and Potting silicone, please feel free to contact with Miss Apple.

Tel: 0086-755-89948013

Moible: 0086-15889446131

Encapsulant and Potting silicone



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.